Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads
Molykote® Longterm 2 Plus Extreme Pressure Bearing Grease is used successfully:
For bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks.
Where there is a risk of fretting corrosion, groove formation (Brinell effect) or moisture.
High load-carrying capacity
Suitable for long-term lubrication
In mixed friction it provides wear protection due to solid lubricants and EP (extreme pressure) additives
Good adhesion strength
Good protection against corrosion
Clean points of contact. As is usual with lubricating greases, apply by means of a brush, spatula, or automatic lubrication device. It can be used in central lubrication systems.
|Base oil viscosity||265 mm2 /s at 40°C1|
|Drop point||≥ 175 °C|
|Flash point (IP34)|
|Effective temperature range|
|Solidification point (of the base fluid)|
|Coefficient of friction (steel on steel, steady state)|
© Copyright by unadxb.com