Permatex 26BR

OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids.

FEATURES AND BENEFITS

Taste

INSTRUCTIONS FOR USE

  1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner.
  2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16” to 1/4” bead.
  3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
  4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions.
  5. Clean uncured silicone from hands, tools and clothing with Fast Orange® Hand Cleaner.

TECHNICAL DATA (TYPICAL VALUES)

PropertyResult
Consistency
Base oil viscosity
Drop point
Flash point (IP34)
Effective temperature range-65ºF to 650ºF (-54°C to 343°C)
Solidification point (of the base fluid)
Coefficient of friction (steel on steel, steady state)

Request Safety Data Sheet

Need Help

Prefer speaking with a human to filling out a form? call us and we will connect you with a team member who can help.

+971 50 963 8539

© Copyright by unadxb.com