PLASTICWELD™ SYRINGE - 25 ML (SKU: 50132)

PlasticWeld™ is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld™ will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld™ sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a tensile strength of 3900 PSI and cures to an off-white color.

GREAT FOR

  • Most Hard Plastics
  • ABS
  • Fiberglass
  • PVC
  • Glass
  • Vinyl
  • Most Composites

USE ON

  • Automotive
  • Ceramic
  • Fiberglass
  • Plastic/Composite/PVC
  • And More

FEATURES AND BENEFITS

STRENGTH - 3900 PSI
SET TIME - 5 Minutes
CURE TIME - 1 Hours
CURE COLOR - Off White

INSTRUCTIONS FOR USE

PREPARE

Clean repair area of dirt, grease, oil, paint, rust, etc.

MIX

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY

Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY

Set in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees F, then set time is longer.

Request Safety Data Sheet

Need Help

Prefer speaking with a human to filling out a form? call us and we will connect you with a team member who can help.

+971 50 963 8539

© Copyright by unadxb.com