Extremely wide service temperature range from -30°C to +1427°C.
Eliminates metal to metal contact and maintains lubrication qualities under wide variations of temperature and adverse operating conditions and prevents galling, hardening, fretting, seizure, stripping, cold-welding, sintering, fusion of threads, bolt breaking and distortion
Enables faster and rapid assembly and non-destructive disassembly even after long term exposure to high temperatures and corrosive atmospheres
Does not contain any ingredients that may poison reactor catalyst beds such as copper, lead, sulfurs, chlorides, halogens, silicones
Highly resistant to hot & cold water, brine water, steam, humidity, moisture, dilute acids and alkalis, rust, corrosion and oxidation
Safe to be used in the presence of ammonia, acetylene and vinyl monomers which are highly unstable in the presence of copper
Low friction properties reduce wear and friction to increase life of the equipment
Chemically inert and does not react with metals to cause pitting, and prevents intergranular or electrolytic corrosion of high strength ferrous or non-ferrous materials
Extremely recommended for use on all high strength alloys, stainless steel and nickel alloys
Meets purity levels for use in nuclear class hardware
Application
Primary applications for Nikkel Lube is in Nuclear Power Plants, Steel Plants, Petrochemical & Fertilizer Units, Refineries for providing high temperature, extreme pressure, anti seize and anti corrosion lubrication for equipment as burner tips, furnace hinges, reactor bolts, studs, pipe fittings, threaded connections, flanges, pump fittings, unions.
It can be used as a heavy duty anti seize thread compound for all high strength alloys, nickel alloys and stainless steel hardware or fittings to provide effective lubrication at high temperatures and prevent seizure.
It can be safely used in the presence of ammonia, acetylene or vinyl monomers that are unstable in the presence of copper.
Direction to Use
Use as supplied. Never dilute or mix with other oil or grease. Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply Nikkel Lube liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed.
