Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
Low coefficient of friction
High-pressure withstanding capacity
Load-bearing capacity exceeds the yield point of most metals
Offers protection from wear and friction
Eliminates metal-to-metal contact
Prevents seizure, scoring, galling, fretting corrosion and stick slip
Makes disassembly easier and non-destructive irrespective of operational period or conditions
Economical to use owing to its high surface coverage capacity
Aids running in and provides emergency lubrication during start ups
Prevents cold welding and stick slip
Good affinity for metal surfaces
Application
As a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.
As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.
As a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling, cold heading, swaging and forging.
As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.
Direction to Use
Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease
