Highly adhesive transparent silicone grease for fittings, seals and plastic parts.
NSF H1 registered
Tasteless and odourless
Highly effective due to excellent adhesion on all materials
Neutral behaviour with regard to plastics and elastomers
Completely EPDM-compatible
High long-term stability without drying out, hardening or bleeding
Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
MOSH/MOAH-free (as per recipe)
Application
Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
Lubrication of O-rings and rubber seals for assembly and during operation
Lubrication of plastic parts
Direction to Use
Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush,spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer’s instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.
