OKS 1112 Silicone Grease for Vacuum Valves

SKU :

Pack Size : 500 g

10 Piece per Cartoon

Category

Downloads

Share Product :

Description

OKS 1112 is a silicone grease for slide valves and valves.

No carbonization, no melting, steam pressure stays negligible up to +200°C

Nearly constant consistency between -30 and +200°C

No corrosive influence on metals and no softening influence on rubber and plastics

Good resistance against solvents and excellent resistance against numerous chemical agents

Resistive to cold and hot water, acetone, ethanol, ethylenglycole, glycerine and methanol, most of diluted bases and acids mineral and vegetable oils and numerous organic compounds and almost all usual gases

Application

Lubrication of closing devices and taps, as well as ground joints in industrial vacuum and laboratory equipment, if the consistency of other OKS silicone greases is insufficient.

Direction to Use

For best results, clean lubricant points and surfaces carefully, e.g. with OKS 2610 or OKS 2611. Apply grease evenly thin to the function point (e.g. with a brush or spatula etc.). Avoid excess. Observe the instructions of the machine manufacturer. Only mix with appropriate lubricants. Silicone-based plastics, e.g. silicone rubber, can be dissolved by silicone grease. Silicone grease must not be applied to sliding surfaces under influence of pure oxygen.