Synthetic grease for bearing points subject to extremely high temperatures and corrosive environmental influences.
Reduces wear and friction
Good corrosion protection
Excellent temperature resistance
When operating temperature is exceeded, forms only minimal residues
Good plastic and elastomer compatibility
Good resistance against water influence and aggressive environmental influences
Application
Lubrication of rolling and friction bearings subjected to high temperatures, corrosive environmental influences
Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air fans that are subjected to temperature stress
Suitable for lubricating exhaust-gas fans
Direction to Use
first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid overlubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Only mix with suitable lubricants.
