For optimum effect clean thoroughly the lubrication point e.g. with OKS 2610/2611 Universal Cleaner. Before initial filling remove
corrosion protection agent. Fill bearing so that all functional areas receive grease for sure. Normal bearings are filled up to 1/3 of
the free interior housing space. Slow-running bearings (DN value < 50,000) and their housings have to be completely filled. Fill
gear housings only up to 3/4. Instructions of the bearing and machine manufacturer have to be observed. Relubrication intervals
and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has
to be limited to avoid excess lubrication of the bearing. At longer relubrication intervals a complete exchange of the old grease is
recommended. Do only mix with suitable lubricants.
